Number of views：2204order Release Date：2020-11-26

LCD splicing screenWhat conditions must the installation environment meet - Installation environment requirements

1. Environmental requirements for LCD splicing installation

The installation ground is smooth and solid, with strong load-bearing capacity and deformation. Due to the direct contact between the LCD splicing bracket and the anti-static floor, it is necessary to ensure that the ground can withstand stress and deformation for a long time.

2. Lighting requirements

Concealed lighting recommendation can, the light does not directly point towards the screen direction, and the distance from the screen should be kept at 3 meters to avoid affecting the projection effect; Secondly, direct sunlight should be avoided.

3. Voltage

Low voltage cables (VGA video network serial mouse and keyboard extension cables, etc.) should be separated from high-voltage cable lines to avoid interference.

4. Power supply,

Considering that the system may encounter special breakpoints and current surges, the LCD splicing unit itself has a power protection design to ensure the normal and safe operation of the equipment; AC 220V/-5% power supply system; Three eye socket with protective grounding wire, the socket number is related to the connector screen; The power supply voltage should be stable and reliable; The system equipment should have good grounding, with a grounding resistance of less than 2 Ω, to ensure that the equipment is not damaged in the event of lightning strikes or other special circumstances.

LCD splicing screenWhat conditions must the installation environment meet - System environment requirements

System environment,

1) Timely fulfill the requirements for temperature and humidity control room. The working environment temperature is 23 ℃ and the relative humidity is 20%~80%. Return to the air conditioner together.

2) The temperature and humidity of the air conditioner should be adjusted to the same ratio before and after splicing the screen to ensure the heat dissipation and flatness of the splicing.

3) Clean room splicing screen, dust-proof.

4) The fire sprinkler shall be as far away from the splicing as possible, and spray extinguishing agent shall be used.

Shenzhen Jintong Display Technology Co., Ltd

Address: 4th Floor, Building A, Xinbaoyi Industry and Trade Building, Zhongting North Road, Bao'an District, Shenzhen

Phone: 0755-23576861

Fax: 0755-23573050

After sales service: 18603078925

24-hour sales hotline:

15220233259 / 13923710018

Email: jintong0320@126.com